Skip to main content

Try this font now! Use the controls below to customize your text string and its appearance.

Font Size:

Text Color:

Background:

Try this web font now! Simply edit the sample text below or change colors and size.

Font Size:

Text Color:

Background:

Some characters might not be visible while the full web font is loading...Loading

Try this font now! Use the controls below to customize your text string and its appearance.

Try this web font now! Enter your text and click the 'Change Sample Text' button.

Some characters might not be visible while the full web font is loading...Loading

72 好きなことばのカタチを造る
60 好きなことばのカタチを造る
48 好きなことばのカタチを造る
36 好きなことばのカタチを造る
24 好きなことばのカタチを造る
18 好きなことばのカタチを造る
14 好きなことばのカタチを造る
12 好きなことばのカタチを造る
10 好きなことばのカタチを造る
8 好きなことばのカタチを造る
Loading...
Loading...
  • liga
  • dlig
  • zero
  • expt
  • fwid
  • hwid
  • jp78
  • pwid
  • trad
  • vert
  • vrt2
  • halt
  • jp90
  • kern
  • nlck
  • palt
  • vhal
  • vkrn
  • vpal
  • liga

    Standard Ligatures

    Tag: liga

    Function: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers the ligatures which the designer/manufacturer judges should be used in normal conditions. The glyph for ffl replaces the sequence of glyphs f f l.

  • dlig

    Discretionary Ligatures

    Tag: dlig

    Function: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers those ligatures which may be used for special effect, at the user's preference. The glyph for ct replaces the sequence of glyphs c t, or U+322E (Kanji ligature for "Friday") replaces the sequence U+91D1 U+66DC U+65E5.

  • zero

    Slashed Zero

    Tag: zero

    Function: Some fonts contain both a default form of zero, and an alternative form which uses a diagonal slash through the counter. Especially in condensed designs, it can be difficult to distinguish between 0 and O (zero and capital O) in any situation where capitals and lining figures may be arbitrarily mixed. This feature allows the user to change from the default 0 to a slashed form. When setting labels, the user applies this feature to get the slashed 0.

  • expt

    Expert Forms

    Tag: expt

    Function: Like the JIS78 Forms described above, this feature replaces standard forms in Japanese fonts with corresponding forms preferred by typographers. Although most of the JIS78 substitutions are included, the expert substitution goes on to handle many more characters. The user would invoke this feature to replace kanji character U+5516 with U+555E.

  • fwid

    Full Width

    Tag: fwid

    Function: Replaces glyphs set on other widths with glyphs set on full (usually em) widths. In a CJKV font, this may include "lower ASCII" Latin characters and various symbols. In a European font, this feature replaces proportionally-spaced glyphs with monospaced glyphs, which are generally set on widths of 0.6 em. The user may invoke this feature in a Japanese font to get full monospaced Latin glyphs instead of the corresponding proportionally-spaced versions.

  • hwid

    Half Width

    Tag: hwid

    Function: Replaces glyphs on proportional widths, or fixed widths other than half an em, with glyphs on half-em (en) widths. Many CJKV fonts have glyphs which are set on multiple widths; this feature selects the half-em version. There are various contexts in which this is the preferred behavior, including compatibility with older desktop documents. The user may replace a proportional Latin glyph with the same character set on a half-em width.

  • jp78

    JIS78 Forms

    Tag: jp78

    Function: This feature replaces default (JIS90) Japanese glyphs with the corresponding forms from the JIS C 6226-1978 (JIS78) specification. The user would invoke this feature to replace kanji character U+5516 with U+555E.

  • pwid

    Proportional Widths

    Tag: pwid

    Function: Replaces glyphs set on uniform widths (typically full or half-em) with proportionally spaced glyphs. The proportional variants are often used for the Latin characters in CJKV fonts, but may also be used for Kana in Japanese fonts. The user may invoke this feature in a Japanese font to get a proportionally-spaced glyph instead of a corresponding half-width Roman glyph or a full-width Kana glyph.

  • trad

    Traditional Forms

    Tag: trad

    Function: Replaces 'simplified' Chinese hanzi or Japanese kanji forms with the corresponding 'traditional' forms. The user inputs U+53F0 and is offered a choice of U+6AAF, U+81FA, or U+98B1.

  • vert

    Vertical Writing

    Tag: vert

    Function: Replaces default forms with variants adjusted for vertical writing when in vertical writing mode. While most CJKV glyphs remain vertical when set in vertical writing mode, some take a different form (usually rotated and repositioned) for this purpose. Glyphs covered by this feature correspond to the set normally rotated in low-end DTP applications. In vertical writing mode, the opening parenthesis (U+FF08) is replaced by the rotated form (U+FE35).

  • vrt2

    Vertical Rotation

    Tag: vrt2

    Function: Replaces some fixed-width (half-, third- or quarter-width) or proportional-width glyphs (mostly Latin or katakana) with forms suitable for vertical writing (that is, rotated 90 degrees clockwise). Note that these are a superset of the glyphs covered in the vert table. ATM/NT 4.1 and the Windows 2000 OTF driver impose the following requirements for an OpenType font with CFF outlines to be used for vertical writing: the vrt2 feature must be present in the GSUB table, it must comprises a single lookup of LookupType 1 and LookupFlag 0, and the lookup must have a single subtable. The predecessor feature, vert, is ignored. A rotated glyph must be designed such that its top side bearing and vertical advance as recorded in the Vertical Metrics ('vmtx') table are identical to the left side bearing and horizontal advance, respectively, of the corresponding upright glyph as recorded in the Horizontal Metrics ('hmtx') table. (The horizontal advance of the rotated glyph may be set to any value, since the glyph is intended only for vertical writing use. The vendor may however set it to head.unitsPerEm, to prevent overlap during font proofing tests, for example.) Thus, proportional-width glyphs with rotated forms in the vrt2 feature will appear identically spaced in both vertical and horizontal writing. In order for kerning to produce identical results as well, developers must ensure that the Vertical Kerning (vkrn) feature record kern values between the rotated glyphs that are the same as kern values between their corresponding upright glyphs in the Kerning (kern) feature. Proportional- or half-width Latin and half-width katakana characters are rotated 90 degrees clockwise for vertical writing.

  • halt

    Alternate Half Width

    Tag: halt

    Function: Respaces glyphs designed to be set on full-em widths, fitting them onto half-em widths. This differs from hwid in that it does not substitute new glyphs. The user may invoke this feature in a CJKV font to get better fit for punctuation or symbol glyphs without disrupting the monospaced alignment.

  • jp90

    JIS90 Forms

    Tag: jp90

    Function: This feature replaces Japanese glyphs from the JIS78 or JIS83 specifications with the corresponding forms from the JIS X 0208-1990 (JIS90) specification. The user would invoke this feature to replace kanji character U+555E with U+5516.

  • kern

    Kerning

    Tag: kern

    Function: Adjusts amount of space between glyphs, generally to provide optically consistent spacing between glyphs. Although a well-designed typeface has consistent inter-glyph spacing overall, some glyph combinations require adjustment for improved legibility. Besides standard adjustment in the horizontal direction, this feature can supply size-dependent kerning data via device tables, "cross-stream" kerning in the Y text direction, and adjustment of glyph placement independent of the advance adjustment. Note that this feature may apply to runs of more than two glyphs, and would not be used in monospaced fonts. Also note that this feature does not apply to text set vertically. The o is shifted closer to the T in the combination "To."

  • nlck

    NLC Kanji Forms

    Tag: nlck

    Function: The National Language Council (NLC) of Japan has defined new glyph shapes for a number of JIS characters. The 'nlck' feature is used to access those glyphs.

  • palt

    Proportional Alternate Width

    Tag: palt

    Function: Respaces glyphs designed to be set on full-em widths, fitting them onto individual (more or less proportional) horizontal widths. This differs from pwid in that it does not substitute new glyphs (GPOS, not GSUB feature). The user may prefer the monospaced form, or may simply want to ensure that the glyph is well-fit and not rotated in vertical setting (Latin forms designed for proportional spacing would be rotated). The user may invoke this feature in a Japanese font to get Latin, Kanji, Kana or Symbol glyphs with the full-width design but individual metrics.

  • vhal

    Alternate Vertical Half Metrics

    Tag: vhal

    Function: Respaces glyphs designed to be set on full-em heights, fitting them onto half-em heights. This differs from valt in that it does not substitute new glyphs. The user may invoke this feature in a CJKV font to get better fit for punctuation or symbol glyphs without disrupting the monospaced alignment.

  • vkrn

    Vertical Kerning

    Tag: vkrn

    Function: Adjusts amount of space between glyphs, generally to provide optically consistent spacing between glyphs. Although a well-designed typeface has consistent inter-glyph spacing overall, some glyph combinations require adjustment for improved legibility. Besides standard adjustment in the vertical direction, this feature can supply size-dependent kerning data via device tables, "cross-stream" kerning in the X text direction, and adjustment of glyph placement independent of the advance adjustment. Note that this feature may apply to runs of more than two glyphs, and would not be used in monospaced fonts. Also note that this feature applies only to text set vertically. When the katakana character U+30B9 or U+30D8 is followed by U+30C8 in a vertical setting, U+30C8 is shifted up to fit more evenly.

  • vpal

    Proportional Alternate Vertical Metrics

    Tag: vpal

    Function: Respaces glyphs designed to be set on full-em heights, fitting them onto individual (more or less proportional) vertical heights. This differs from valt in that it does not substitute new glyphs (GPOS, not GSUB feature). The user may prefer the monospaced form, or may simply want to ensure that the glyph is well-fit. The user may invoke this feature in a Japanese font to get Latin, Kanji, Kana or Symbol glyphs with the full-height design but individual metrics.

Current Product Technical Details

Format: OpenType Std (CFF)
Character Count:9498
Product ID:AD109
Material Number:167413842
Technical Name(s):RyoGothicPlusN-ExtraLight
File Name(s):RyoGothicPlusN-ExtraLight.otf
Window Menu Name(s):Ryo Gothic PlusN EL

Current Product Technical Details

Format:Japanese 1.3
Character Count:9498
CSS Name:RyoGothicPlusNW50-XtrLi

Available Web Font Formats

Format:WOFF2
File Size:2,026.21 Kb
Browsers:
  • Chrome WOFF2 is supported in Chrome versions 36+
  • Opera WOFF2 is supported in Opera versions 26+
Format:WOFF
File Size:2,763.97 Kb
Browsers:
  • Chrome WOFF is supported in Chrome versions 5+
  • Firefox WOFF is supported in Firefox versions 3.6+
  • Internet Explorer WOFF is supported in Internet Explorer versions 9+
  • Opera WOFF is supported in Opera versions 11.1+
  • Safari WOFF is supported in Safari versions 5.1+
Format:EOT
File Size:2,137.56 Kb
Browsers:
  • Internet Explorer EOT is supported in Internet Explorer versions 4+
Format:SVG
File Size:5,382.04 Kb
Browsers:
  • Chrome SVG is supported in Chrome versions 3+
  • Opera SVG is supported in Opera versions 9+
  • Safari SVG is supported in Safari versions 3.2+
Format:TTF
File Size:4,318.88 Kb
Browsers:
  • Chrome TTF is supported in Chrome versions 4+
  • Firefox TTF is supported in Firefox versions 3.5+
  • Opera TTF is supported in Opera versions 10+
  • Safari TTF is supported in Safari versions 3.1+