Skip to main content

FF Seria® Std Black

Try this font now! Use the controls below to customize your text string and its appearance.

Font Size:

Text Color:

Background:

Try this web font now! Simply edit the sample text below or change colors and size.

Font Size:

Text Color:

Background:

Try this font now! Use the controls below to customize your text string and its appearance.

Try this web font now! Enter your text and click the 'Change Sample Text' button.

72 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
60 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
48 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
36 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
24 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
18 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
14 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
12 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
10 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
8 ﺍﺑﺘﺜﺠﺤﺨﺪﺫﺭﺯﺳﺸﺺ ١٢٣ Aabc34
Loading...
Loading...
  • case
  • frac
  • liga
  • ordn
  • calt
  • init
  • fina
  • ccmp
  • isol
  • medi
  • rlig
  • case

    Case-Sensitive Forms

    Tag: case

    Function: Shifts various punctuation marks up to a position that works better with all-capital sequences or sets of lining figures; also changes oldstyle figures to lining figures. By default, glyphs in a text face are designed to work with lowercase characters. Some characters should be shifted vertically to fit the higher visual center of all-capital or lining text. Also, lining figures are the same height (or close to it) as capitals, and fit much better with all-capital text. The user selects a block of text and applies this feature. The dashes, bracketing characters, guillemet quotes and the like shift up to match the capitals, and oldstyle figures change to lining figures.

  • frac

    Fractions

    Tag: frac

    Function: Replaces figures separated by a slash with 'common' (diagonal) fractions. The user enters 3/4 in a recipe and gets the threequarters fraction.

  • liga

    Standard Ligatures

    Tag: liga

    Function: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers the ligatures which the designer/manufacturer judges should be used in normal conditions. The glyph for ffl replaces the sequence of glyphs f f l.

  • ordn

    Ordinals

    Tag: ordn

    Function: Replaces default alphabetic glyphs with the corresponding ordinal forms for use after figures. One exception to the follows-a-figure rule is the numero character (U+2116), which is actually a ligature substitution, but is best accessed through this feature. The user applies this feature to turn 2.o into 2.o (abbreviation for secundo).

  • calt

    Contextual Alternates

    Tag: calt

    Function: In specified situations, replaces default glyphs with alternate forms which provide better joining behavior. Used in script typefaces which are designed to have some or all of their glyphs join. In Caflisch Script, o is replaced by o.alt2 when followed by an ascending letterform.

  • init

    Initial Forms

    Tag: init

    Function: Replaces glyphs at the beginnings of words with alternate forms designed for this use. This is common in Latin connecting scripts, and required in various non-Latins like Arabic. In the typeface Ex Ponto, the default t in the word 'type' is replaced with the t.begin form.

  • fina

    Terminal Forms

    Tag: fina

    Function: Replaces glyphs at the ends of words with alternate forms designed for this use. This is common in Latin connecting scripts, and required in various non-Latins like Arabic. In the typeface Poetica, the default e in the word 'type' is replaced with the e.end form.

  • ccmp

    Glyph Composition/Decomposition

    Tag: ccmp

    Function: To minimize the number of glyph alternates, it is sometimes desired to decompose a character into two glyphs. Additionally, it may be preferable to compose two characters into a single glyph for better glyph processing. This feature permits such composition/decompostion. The feature should be processed as the first feature processed, and should be processed only when it is called. In Syriac, the character 0x0732 is a combining mark that has a dot above AND a dot below the base character. To avoid multiple glyph variants to fit all base glyphs, the character is decomposed into two glyphs...a dot above and a dot below. These two glyphs can then be correctly placed using GPOS. In Arabic it might be preferred to combine the shadda with fatha (0x0651, 0x064E) into a ligature before processing shapes. This allows the font vendor to do special handling of the mark combination when doing further processing without requiring larger contextual rules.

  • isol

    Isolated Forms

    Tag: isol

    Function: Replaces the nominal form of glyphs with their isolated forms. In Arabic, if the Alef is followed by Lam, the default glyph for Alef is replaced with its isolated form.

  • medi

    Medial Forms

    Tag: medi

    Function: Replaces glyphs in the middles of words (i.e. following a beginning and preceding an end) with alternate forms designed for this use. Note: This is different from the default form, which is designed for stand-alone use. This is common in Latin connecting scripts, and required in various non-Latins like Arabic. In the typeface Caflisch Script, the y and p in the word 'type' are replaced by the y.med and p.med forms.

  • rlig

    Required Ligatures

    Tag: rlig

    Function: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers those ligatures, which the script determines as required to be used in normal conditions. This feature is important for some scripts to insure correct glyph formation. The Arabic character lam followed by alef will always form a ligated lamalef form. This ligated form is a requirement of the script's shaping. The same happens with the Syriac script.

Current Product Technical Details

Format: OpenType Std (CFF)
Character Count:569
Product ID:FF31844
Material Number:167376874
Technical Name(s):SeriaArabic-Black
File Name(s):FontFont Installation Guides.pdf, SeriaArabic-Black.otf, SeriaArabicBlack-InfoGuide.pdf
Window Menu Name(s):SeriaArabic-Black

Current Product Technical Details

Format:Arabic Standard
Character Count:569
CSS Name:

Available Web Font Formats

Format:WOFF
File Size:53.89 Kb
Browsers:
  • Chrome WOFF is supported in Chrome versions 5+
  • Firefox WOFF is supported in Firefox versions 3.6+
  • Internet Explorer WOFF is supported in Internet Explorer versions 9+
  • Opera WOFF is supported in Opera versions 11.1+
  • Safari WOFF is supported in Safari versions 5.1+
Format:WOFF2
File Size:42.04 Kb
Browsers:
  • Chrome WOFF2 is supported in Chrome versions 36+
  • Opera WOFF2 is supported in Opera versions 26+
Format:TTF
File Size:117.76 Kb
Browsers:
  • Chrome TTF is supported in Chrome versions 4+
  • Firefox TTF is supported in Firefox versions 3.5+
  • Opera TTF is supported in Opera versions 10+
  • Safari TTF is supported in Safari versions 3.1+
Format:EOT
File Size:43.25 Kb
Browsers:
  • Internet Explorer EOT is supported in Internet Explorer versions 4+
Format:SVG
File Size:328.71 Kb
Browsers:
  • Chrome SVG is supported in Chrome versions 3+
  • Opera SVG is supported in Opera versions 9+
  • Safari SVG is supported in Safari versions 3.2+

We support this browser, but the preview image is currently not available.