Skip to main content

Variety Value Pack 2

Try this font now! Use the controls below to customize your text string and its appearance.

Select font


Font Size:

Text Color:

Background:

Try this web font now! Simply edit the sample text below or change colors and size.

Select font


Font Size:

Text Color:

Background:

Try this font now! Use the controls below to customize your text string and its appearance.

Select font


Try this web font now! Enter your text and click the 'Change Sample Text' button.

Select font


Loading...
Loading...
  • aalt
  • frac
  • liga
  • ordn
  • sups
  • salt
  • aalt

    Access All Alternates

    Tag: aalt

    Function: This feature makes all variations of a selected character accessible. This serves several purposes: An application may not support the feature by which the desired glyph would normally be accessed; the user may need a glyph outside the context supported by the normal substitution, or the user may not know what feature produces the desired glyph. Since many-to-one substitutions are not covered, ligatures would not appear in this table unless they were variant forms of another ligature. A user inputs the P in Poetica, and is presented with a choice of the four standard capital forms, the eight swash capital forms, the initial capital form and the small capital form.

  • case

    Case-Sensitive Forms

    Tag: case

    Function: Shifts various punctuation marks up to a position that works better with all-capital sequences or sets of lining figures; also changes oldstyle figures to lining figures. By default, glyphs in a text face are designed to work with lowercase characters. Some characters should be shifted vertically to fit the higher visual center of all-capital or lining text. Also, lining figures are the same height (or close to it) as capitals, and fit much better with all-capital text. The user selects a block of text and applies this feature. The dashes, bracketing characters, guillemet quotes and the like shift up to match the capitals, and oldstyle figures change to lining figures.

  • dnom

    Denominators

    Tag: dnom

    Function: Replaces selected figures which follow a slash with denominator figures. In the string 11/17 selected by the user, the application turns the 17 into denominators when the user applies the fraction feature.

  • frac

    Fractions

    Tag: frac

    Function: Replaces figures separated by a slash with 'common' (diagonal) fractions. The user enters 3/4 in a recipe and gets the threequarters fraction.

  • liga

    Standard Ligatures

    Tag: liga

    Function: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers the ligatures which the designer/manufacturer judges should be used in normal conditions. The glyph for ffl replaces the sequence of glyphs f f l.

  • lnum

    Lining Figures

    Tag: lnum

    Function: This feature changes selected figures from oldstyle to the default lining form. The user invokes this feature in order to get lining figures, which fit better with all-capital text. Various characters designed to be used with figures may also be covered by this feature. In cases where lining figures are the default form, this feature would undo previous substitutions.

  • locl

    Localized Forms

    Tag: locl

    Function: Many scripts used to write multiple languages over wide geographical areas have developed localized variant forms of specific letters, which are used by individual literary communities. For example, a number of letters in the Bulgarian and Serbian alphabets have forms distinct from their Russian counterparts and from each other. In some cases the localized form differs only subtly from the script 'norm', in others the forms are radically distinct. This feature enables localized forms of glyphs to be substituted for default forms. The user applies this feature to text to enable localized Bulgarian forms of Cyrillic letters; alternatively, the feature might enable localized Russian forms in a Bulgarian manufactured font in which the Bulgarian forms are the default characters.

  • numr

    Numerators

    Tag: numr

    Function: Replaces selected figures which precede a slash with numerator figures, and replaces the typographic slash with the fraction slash. In the string 11/17 selected by the user, the application turns the 11 into numerators, and the slash into a fraction slash when the user applies the fraction feature.

  • onum

    Old Style Figures

    Tag: onum

    Function: This feature changes selected figures from the default lining style to oldstyle form. The user invokes this feature to get oldstyle figures, which fit better into the flow of normal upper- and lowercase text. Various characters designed to be used with figures may also have oldstyle versions.

  • ordn

    Ordinals

    Tag: ordn

    Function: Replaces default alphabetic glyphs with the corresponding ordinal forms for use after figures. One exception to the follows-a-figure rule is the numero character (U+2116), which is actually a ligature substitution, but is best accessed through this feature. The user applies this feature to turn 2.o into 2.o (abbreviation for secundo).

  • pnum

    Proportional Figures

    Tag: pnum

    Function: Replaces figure glyphs set on uniform (tabular) widths with corresponding glyphs set on glyph-specific (proportional) widths. Tabular widths will generally be the default, but this cannot be safely assumed. Of course this feature would not be present in monospaced designs. The user may apply this feature to get even spacing for lining figures used as dates in an all-cap headline.

  • sinf

    Scientific Inferiors

    Tag: sinf

    Function: Replaces lining or oldstyle figures with inferior figures (smaller glyphs which sit lower than the standard baseline, primarily for chemical or mathematical notation). May also replace lowercase characters with alphabetic inferiors. The application can use this feature to automatically access the inferior figures (more legible than scaled figures).

  • sups

    Superscript

    Tag: sups

    Function: Replaces lining or oldstyle figures with superior figures (primarily for footnote indication), and replaces lowercase letters with superior letters (primarily for abbreviated French titles). The application can use this feature to automatically access the superior figures (more legible than scaled figures) for footnotes, or the user can apply it to Mssr to get the classic form.

  • tnum

    Tabular Figures

    Tag: tnum

    Function: Replaces figure glyphs set on proportional widths with corresponding glyphs set on uniform (tabular) widths. Tabular widths will generally be the default, but this cannot be safely assumed. Of course this feature would not be present in monospaced designs. The user may apply this feature to get oldstyle figures to align vertically in a column.

  • salt

    Stylistic Alternates

    Tag: salt

    Function: Many fonts contain alternate glyph designs for a purely esthetic effect; these don't always fit into a clear category like swash or historical. As in the case of swash glyphs, there may be more than one alternate form. This feature replaces the default forms with the stylistic alternates. The user applies this feature to Industria to get the alternate form of g.

  • Basic Latin

    These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in d

    Tag: Basic Latin

    Function: These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

  • Latin Extended

    These fonts support the Latin Extended character set. Each font is Unicode™ encoded, and available i

    Tag: Latin Extended

    Function: These fonts support the Latin Extended character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

  • lowercase

    Tag: lowercase

    Function:

  • uppercase

    Tag: uppercase

    Function:

Current Product Technical Details

Format: OpenType Std (CFF)
Product ID:OPN616176
Material Number:14707317
Technical Name(s):HumanaScriptITCStd-Bold, HumanaScriptITCStd-Light, HumanaScriptITCStd-Medium, MuscleheadITCStd, RiptideITCStd, JohnHandyStd, KleeStd, RuachStd, UlyssesStd
File Name(s):HumanaScriptITCStd-Bold.otf, HumanaScriptITCStd-Light.otf, HumanaScriptITCStd-Medium.otf, JohnHandyStd.otf, KleeStd.otf, MuscleheadITCStd.otf, RiptideITCStd.otf, RuachStd.otf, UlyssesStd.otf
Window Menu Name(s):Humana Script ITC Std Light, Humana Script ITC Std Light, Humana Script ITC Std Medium, Musclehead ITC Std, Riptide ITC Std, John Handy Std, Klee Std, Ruach Std, Ulysses Std

Other Products Technical Details

Format:Win TrueType
Product ID:000616176
Material Number:14607317
Technical Name(s):KleeLT, UlyssesLT, JohnHandy, Ruach, HumanaScriptITC-Bold, HumanaScriptITC-Light, HumanaScriptITC-Medium, MuscleheadITC, RiptideITC
File Name(s):IT996___.TTF, IT997___.TTF, IT998___.TTF, LT_70253.ttf, LT_70271.ttf, LT_70326.ttf, LT_70382.ttf, LT_70395.ttf, LT_70473.ttf
Window Menu Name(s):Klee LT, Ulysses LT, John Handy, Ruach, Humana Script ITC Light, Humana Script ITC Light, Humana Script ITC Medium, Musclehead ITC, Riptide ITC

Select font


We support this browser, but the preview image is currently not available.