Skip to main content

Monotype Garamond Volume

Try this font now! Use the controls below to customize your text string and its appearance.

Select font


Font Size:

Text Color:

Background:

Try this web font now! Simply edit the sample text below or change colors and size.

Select font


Font Size:

Text Color:

Background:

Try this font now! Use the controls below to customize your text string and its appearance.

Select font


Try this web font now! Enter your text and click the 'Change Sample Text' button.

Select font


Loading...
Loading...
  • aalt
  • frac
  • liga
  • lnum
  • onum
  • ordn
  • sinf
  • sups
  • swsh
  • c2sc
  • smcp
  • salt
  • dlig
  • kern
  • aalt

    Access All Alternates

    Tag: aalt

    Function: This feature makes all variations of a selected character accessible. This serves several purposes: An application may not support the feature by which the desired glyph would normally be accessed; the user may need a glyph outside the context supported by the normal substitution, or the user may not know what feature produces the desired glyph. Since many-to-one substitutions are not covered, ligatures would not appear in this table unless they were variant forms of another ligature. A user inputs the P in Poetica, and is presented with a choice of the four standard capital forms, the eight swash capital forms, the initial capital form and the small capital form.

  • case

    Case-Sensitive Forms

    Tag: case

    Function: Shifts various punctuation marks up to a position that works better with all-capital sequences or sets of lining figures; also changes oldstyle figures to lining figures. By default, glyphs in a text face are designed to work with lowercase characters. Some characters should be shifted vertically to fit the higher visual center of all-capital or lining text. Also, lining figures are the same height (or close to it) as capitals, and fit much better with all-capital text. The user selects a block of text and applies this feature. The dashes, bracketing characters, guillemet quotes and the like shift up to match the capitals, and oldstyle figures change to lining figures.

  • dnom

    Denominators

    Tag: dnom

    Function: Replaces selected figures which follow a slash with denominator figures. In the string 11/17 selected by the user, the application turns the 17 into denominators when the user applies the fraction feature.

  • frac

    Fractions

    Tag: frac

    Function: Replaces figures separated by a slash with 'common' (diagonal) fractions. The user enters 3/4 in a recipe and gets the threequarters fraction.

  • liga

    Standard Ligatures

    Tag: liga

    Function: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers the ligatures which the designer/manufacturer judges should be used in normal conditions. The glyph for ffl replaces the sequence of glyphs f f l.

  • lnum

    Lining Figures

    Tag: lnum

    Function: This feature changes selected figures from oldstyle to the default lining form. The user invokes this feature in order to get lining figures, which fit better with all-capital text. Various characters designed to be used with figures may also be covered by this feature. In cases where lining figures are the default form, this feature would undo previous substitutions.

  • locl

    Localized Forms

    Tag: locl

    Function: Many scripts used to write multiple languages over wide geographical areas have developed localized variant forms of specific letters, which are used by individual literary communities. For example, a number of letters in the Bulgarian and Serbian alphabets have forms distinct from their Russian counterparts and from each other. In some cases the localized form differs only subtly from the script 'norm', in others the forms are radically distinct. This feature enables localized forms of glyphs to be substituted for default forms. The user applies this feature to text to enable localized Bulgarian forms of Cyrillic letters; alternatively, the feature might enable localized Russian forms in a Bulgarian manufactured font in which the Bulgarian forms are the default characters.

  • numr

    Numerators

    Tag: numr

    Function: Replaces selected figures which precede a slash with numerator figures, and replaces the typographic slash with the fraction slash. In the string 11/17 selected by the user, the application turns the 11 into numerators, and the slash into a fraction slash when the user applies the fraction feature.

  • onum

    Old Style Figures

    Tag: onum

    Function: This feature changes selected figures from the default lining style to oldstyle form. The user invokes this feature to get oldstyle figures, which fit better into the flow of normal upper- and lowercase text. Various characters designed to be used with figures may also have oldstyle versions.

  • ordn

    Ordinals

    Tag: ordn

    Function: Replaces default alphabetic glyphs with the corresponding ordinal forms for use after figures. One exception to the follows-a-figure rule is the numero character (U+2116), which is actually a ligature substitution, but is best accessed through this feature. The user applies this feature to turn 2.o into 2.o (abbreviation for secundo).

  • sinf

    Scientific Inferiors

    Tag: sinf

    Function: Replaces lining or oldstyle figures with inferior figures (smaller glyphs which sit lower than the standard baseline, primarily for chemical or mathematical notation). May also replace lowercase characters with alphabetic inferiors. The application can use this feature to automatically access the inferior figures (more legible than scaled figures).

  • sups

    Superscript

    Tag: sups

    Function: Replaces lining or oldstyle figures with superior figures (primarily for footnote indication), and replaces lowercase letters with superior letters (primarily for abbreviated French titles). The application can use this feature to automatically access the superior figures (more legible than scaled figures) for footnotes, or the user can apply it to Mssr to get the classic form.

  • swsh

    Swash

    Tag: swsh

    Function: This feature replaces default character glyphs with corresponding swash glyphs. Note that there may be more than one swash alternate for a given character. The user inputs the ampersand character when setting text with Poetica with this feature active, and is presented with a choice of the 63 ampersand forms in that face.

  • c2sc

    Small Capitals From Capitals

    Tag: c2sc

    Function: Small Capitals From Capitals

  • smcp

    Small Capitals

    Tag: smcp

    Function: This feature turns lowercase characters into small capitals. This corresponds to the common SC font layout. It is generally used for display lines set in Large & small caps, such as titles. Forms related to small capitals, such as oldstyle figures, may be included. The user enters text as mixed capitals and lowercase, and gets Large & small cap text.

  • salt

    Stylistic Alternates

    Tag: salt

    Function: Many fonts contain alternate glyph designs for a purely esthetic effect; these don't always fit into a clear category like swash or historical. As in the case of swash glyphs, there may be more than one alternate form. This feature replaces the default forms with the stylistic alternates. The user applies this feature to Industria to get the alternate form of g.

  • dlig

    Discretionary Ligatures

    Tag: dlig

    Function: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers those ligatures which may be used for special effect, at the user's preference. The glyph for ct replaces the sequence of glyphs c t, or U+322E (Kanji ligature for "Friday") replaces the sequence U+91D1 U+66DC U+65E5.

  • ss01

    Sylistic Set 1

    Tag: ss01

    Function: In addition to, or instead of, stylistic alternatives of individual glyphs (see 'salt' feature), some fonts may contain sets of stylistic variant glyphs corresponding to portions of the character set, e.g. multiple variants for lowercase letters in a Latin font. Glyphs in stylistic sets may be designed to harmonise visually, interract in particular ways, or otherwise work together. Examples of fonts including stylistic sets are Zapfino Linotype and Adobe's Poetica. Individual features numbered sequentially with the tag name convention 'ss01' 'ss02' 'ss03' . 'ss20' provide a mechanism for glyphs in these sets to be associated via GSUB lookup indexes to default forms and to each other, and for users to select from available stylistic sets.

  • Basic Latin

    These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in d

    Tag: Basic Latin

    Function: These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

  • Latin Extended

    These fonts support the Latin Extended character set. Each font is Unicode™ encoded, and available i

    Tag: Latin Extended

    Function: These fonts support the Latin Extended character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

  • lowercase

    Tag: lowercase

    Function:

  • uppercase

    Tag: uppercase

    Function:

Current Product Technical Details

Format: OpenType Std (CFF)
Product ID:OPN711023
Material Number:14706920
Technical Name(s):GaramondMTStd-Regular, GaramondMTStd-ItalicAlt, GaramondMTStd-Bold, GaramondMTStd-BoldItalic, GaramondMTStd-Italic
File Name(s):GaramondMTStd-Bold.otf, GaramondMTStd-BoldItalic.otf, GaramondMTStd-Italic.otf, GaramondMTStd-ItalicAlt.otf, GaramondMTStd-Regular.otf
Window Menu Name(s):Garamond MT Std, Garamond MT Std Italic Alt, Garamond MT Std, Garamond MT Std, Garamond MT Std

Select font


We support this browser, but the preview image is currently not available.