Skip to main content

Seol Sans® Complete Family Pack

Try this font now! Use the controls below to customize your text string and its appearance.

Select font


Font Size:

Text Color:

Background:

Try this web font now! Simply edit the sample text below or change colors and size.

Select font


Font Size:

Text Color:

Background:

Try this font now! Use the controls below to customize your text string and its appearance.

Select font


Try this web font now! Enter your text and click the 'Change Sample Text' button.

Select font


Loading...
Loading...
  • aalt
  • frac
  • sinf
  • sups
  • dlig
  • fwid
  • hwid
  • pwid
  • vert
  • vrt2
  • halt
  • hngl
  • kern
  • nalt
  • vhal
  • vkrn
  • aalt

    Access All Alternates

    Tag: aalt

    Function: This feature makes all variations of a selected character accessible. This serves several purposes: An application may not support the feature by which the desired glyph would normally be accessed; the user may need a glyph outside the context supported by the normal substitution, or the user may not know what feature produces the desired glyph. Since many-to-one substitutions are not covered, ligatures would not appear in this table unless they were variant forms of another ligature. A user inputs the P in Poetica, and is presented with a choice of the four standard capital forms, the eight swash capital forms, the initial capital form and the small capital form.

  • frac

    Fractions

    Tag: frac

    Function: Replaces figures separated by a slash with 'common' (diagonal) fractions. The user enters 3/4 in a recipe and gets the threequarters fraction.

  • sinf

    Scientific Inferiors

    Tag: sinf

    Function: Replaces lining or oldstyle figures with inferior figures (smaller glyphs which sit lower than the standard baseline, primarily for chemical or mathematical notation). May also replace lowercase characters with alphabetic inferiors. The application can use this feature to automatically access the inferior figures (more legible than scaled figures).

  • sups

    Superscript

    Tag: sups

    Function: Replaces lining or oldstyle figures with superior figures (primarily for footnote indication), and replaces lowercase letters with superior letters (primarily for abbreviated French titles). The application can use this feature to automatically access the superior figures (more legible than scaled figures) for footnotes, or the user can apply it to Mssr to get the classic form.

  • dlig

    Discretionary Ligatures

    Tag: dlig

    Function: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers those ligatures which may be used for special effect, at the user's preference. The glyph for ct replaces the sequence of glyphs c t, or U+322E (Kanji ligature for "Friday") replaces the sequence U+91D1 U+66DC U+65E5.

  • fwid

    Full Width

    Tag: fwid

    Function: Replaces glyphs set on other widths with glyphs set on full (usually em) widths. In a CJKV font, this may include "lower ASCII" Latin characters and various symbols. In a European font, this feature replaces proportionally-spaced glyphs with monospaced glyphs, which are generally set on widths of 0.6 em. The user may invoke this feature in a Japanese font to get full monospaced Latin glyphs instead of the corresponding proportionally-spaced versions.

  • hwid

    Half Width

    Tag: hwid

    Function: Replaces glyphs on proportional widths, or fixed widths other than half an em, with glyphs on half-em (en) widths. Many CJKV fonts have glyphs which are set on multiple widths; this feature selects the half-em version. There are various contexts in which this is the preferred behavior, including compatibility with older desktop documents. The user may replace a proportional Latin glyph with the same character set on a half-em width.

  • pwid

    Proportional Widths

    Tag: pwid

    Function: Replaces glyphs set on uniform widths (typically full or half-em) with proportionally spaced glyphs. The proportional variants are often used for the Latin characters in CJKV fonts, but may also be used for Kana in Japanese fonts. The user may invoke this feature in a Japanese font to get a proportionally-spaced glyph instead of a corresponding half-width Roman glyph or a full-width Kana glyph.

  • vert

    Vertical Writing

    Tag: vert

    Function: Replaces default forms with variants adjusted for vertical writing when in vertical writing mode. While most CJKV glyphs remain vertical when set in vertical writing mode, some take a different form (usually rotated and repositioned) for this purpose. Glyphs covered by this feature correspond to the set normally rotated in low-end DTP applications. In vertical writing mode, the opening parenthesis (U+FF08) is replaced by the rotated form (U+FE35).

  • vrt2

    Vertical Rotation

    Tag: vrt2

    Function: Replaces some fixed-width (half-, third- or quarter-width) or proportional-width glyphs (mostly Latin or katakana) with forms suitable for vertical writing (that is, rotated 90 degrees clockwise). Note that these are a superset of the glyphs covered in the vert table. ATM/NT 4.1 and the Windows 2000 OTF driver impose the following requirements for an OpenType font with CFF outlines to be used for vertical writing: the vrt2 feature must be present in the GSUB table, it must comprises a single lookup of LookupType 1 and LookupFlag 0, and the lookup must have a single subtable. The predecessor feature, vert, is ignored. A rotated glyph must be designed such that its top side bearing and vertical advance as recorded in the Vertical Metrics ('vmtx') table are identical to the left side bearing and horizontal advance, respectively, of the corresponding upright glyph as recorded in the Horizontal Metrics ('hmtx') table. (The horizontal advance of the rotated glyph may be set to any value, since the glyph is intended only for vertical writing use. The vendor may however set it to head.unitsPerEm, to prevent overlap during font proofing tests, for example.) Thus, proportional-width glyphs with rotated forms in the vrt2 feature will appear identically spaced in both vertical and horizontal writing. In order for kerning to produce identical results as well, developers must ensure that the Vertical Kerning (vkrn) feature record kern values between the rotated glyphs that are the same as kern values between their corresponding upright glyphs in the Kerning (kern) feature. Proportional- or half-width Latin and half-width katakana characters are rotated 90 degrees clockwise for vertical writing.

  • hngl

    Hangul

    Tag: hngl

    Function: Replaces hanja (Chinese-style) Korean characters with the corresponding hangul (syllabic) characters. This effectively reverses the standard input method, in which hangul are entered and replaced by hanja. Many of these substitutions are one-to-one (GSUB lookup type 1), but hanja substitution often requires the user to choose from several possible hangul characters (GSUB lookup type 3). The user may call this feature to get U+AC00 from U+4F3D.

  • nalt

    Alternate Annotation Forms

    Tag: nalt

    Function: Replaces default glyphs with various notational forms (e.g. glyphs placed in open or solid circles, squares, parentheses, diamonds or rounded boxes). In some cases an annotation form may already be present, but the user may want a different one. The user invokes this feature to get U+3200 (the circled form of 'ga') from U+3131 (hangul 'ga').

  • Basic Latin

    These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in d

    Tag: Basic Latin

    Function: These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

  • lowercase

    Tag: lowercase

    Function:

  • uppercase

    Tag: uppercase

    Function:

Current Product Technical Details

Format: OpenType Korean (CFF)
Product ID:MTI133916
Material Number:286133916
Technical Name(s):SeolSans-Black, SeolSans-Bold, SeolSans-Book, SeolSans-Heavy, SeolSans-Light, SeolSans-Medium, SeolSans-Regular, SeolSans-Thin, SeolSans-UltLt, SeolSans-XBlack
File Name(s):SeolSans-Black.otf, SeolSans-Bold.otf, SeolSans-Book.otf, SeolSans-Heavy.otf, SeolSans-Light.otf, SeolSans-Medium.otf, SeolSans-Regular.otf, SeolSans-Thin.otf, SeolSans-UltLt.otf, SeolSans-XBlack.otf
Window Menu Name(s):Seol Sans Black, Seol Sans, Seol Sans Book, Seol Sans Heavy, Seol Sans Light, Seol Sans Medium, Seol Sans, Seol Sans Thin, Seol Sans UltLt, Seol Sans XBlack

Other Products Technical Details

Format: OpenType Korean (TTF)
Product ID:MTI133916
Material Number:287133916
Technical Name(s):SeolSans-Black, SeolSans-Bold, SeolSans-Book, SeolSans-Heavy, SeolSans-Light, SeolSans-Medium, SeolSans-Regular, SeolSans-Thin, SeolSans-UltLt, SeolSans-XBlack
File Name(s):SeolSans-Black.ttf, SeolSans-Bold.ttf, SeolSans-Book.ttf, SeolSans-Heavy.ttf, SeolSans-Light.ttf, SeolSans-Medium.ttf, SeolSans-Regular.ttf, SeolSans-Thin.ttf, SeolSans-UltLt.ttf, SeolSans-XBlack.ttf
Window Menu Name(s):Seol Sans Black, Seol Sans, Seol Sans Book, Seol Sans Heavy, Seol Sans Light, Seol Sans Medium, Seol Sans, Seol Sans Thin, Seol Sans UltLt, Seol Sans XBlack

Select font


We support this browser, but the preview image is currently not available.